Basic water level meter 101 by Solinst in version P2 and P7.
Main Features:
- 101 P7 Submersible Probe measures water levels and total well depth
- More consistent measurements with sensor located at the tip of probe
- Solinst PVDF flat tape has increased tensile strength and electrical efficiency
The Solinst 101 Water Level Meter with P7 Probe features an extremely durable, laser marked PVDF flat tape, with an enhanced dog bone design that is thicker, reducing adherence to the side of well casing.
Enhanced Laser Marked Tape Features:
- Durable PVDF non-stretch tape
- Improved electrical properties
- Thicker dog bone design prevents clinging to sides of the well
- Permanently laser marked every 1/100 ft or each mm
The PVDF flat tape is laser marked every 1/100 ft or each mm; lengths up to 5000 ft (1500 m). New flat tape has increased tensile strength and electrical efficiency by using 6 strands of copper coated stainless steel and 13 strands of stainless steel in each conductor. The P7 Water Level Meter Probe is engineered to allow submersion to 1000 ft. (300 m). Sensor at the tip of the probe provides consistently accurate measurements in wells, boreholes, and cascading water, with almost zero displacement.
Manually measure depth to water using flat tape marked each mm or 1/100 ft. 101 P7 Meters use laser-marked flat tape. Measure total well depth with a P7 Probe (submersible the full length of hte tape).
101 P2 Meters use heat-embossed polyethylene tape. The P2 Probe is simple to clean and repair.
With a stand-alone design, convenient carrying handle, and sturdy probe holder, the standard reels are ergonomically designed for ease of use. They are robust and smooth running. The battery is housed in a convenient drawer in the front of the reel, allowing quick replacement. The reels are equipped with an on/off sensitivity switch, light, buzzer, battery test button, brake and a tape guide stored on the frame.
Water Level Meter Reels
| Operating temperature of reel: |
-20°C to +50°C |
| Submerged operating temperature (tape/probe): |
-20°C to +80°C |
| Wetted materials (tape/probe): |
P7: PVDF, Santoprene, ®Delrin, ®Viton, 316 stainless steel;
P2: MDPE, neoprene, Delrin, 316 stainless steel
|
| Probe pressure rating: |
P7: Fully submersible to depth of all tape lengths |
| Reel IP Rating: |
IP64 (dust and splash proof) |
| Tape lengths: |
P7: 100 to 5000 ft, 30 - 1500 m;
P2: 100 to 1000 ft, 30 - 300 m
|
Length Options
Solinst Model 101 P7 and P2 Water Level Meters are available on reels as shown below, in the following standard lengths:
| Small Reel |
100 ft* |
30 m |
| Small Reel |
200 ft* |
60 m |
| Small Reel |
300 ft* |
100 m |
| Medium Reel |
500 ft* |
150 m |
| Medium Reel |
750 ft* |
250 m |
| Medium Reel |
1000 ft* |
300 m |
| Large Reel |
1250 ft |
400 m |
| X-Large Reel |
1650 ft |
500 m |
| X-Large Reel |
2000 ft |
600 m |
* Polyethylene tapes are only available in these lengths.
